Samsung SGH-P107 Manual

Also see for SGH-P107: User manual User manual User manual User manual User manual

Contents

Phone Settings92Language (Menu 6.5)The language feature enables you to select adisplay language.Security (Menu 6.6)The Security feature enables you to restrict the useof your phone to:• the people of your choice• the types of calls of your choiceVarious codes and passwords are used to protectthe features of your phone. They are described inthe following sections (see also pages 122-124).PIN CheckWhen the PIN Check feature is enabled, you mustenter your PIN each time you switch the phone on.Consequently, any person who does not have yourPIN cannot use your phone without your approval.Note: Before disabling the PIN Check feature, youmust enter your PIN.To change your PIN, refer to the Change PINmenu option (Menu 6.6.2).The following options are available:Disable: the phone connects directly to thenetwork when you switch it on.Enable: you must enter the PIN each time thephone is switched on.Phone Settings93Change PINThis feature allows you to change your current PINto a new one, provided that the PIN Check featureis enabled. You must enter the current PIN beforeyou can specify a new one.Once you have entered a new PIN, you are asked toconfirm it by entering it again.Phone LockWhen the Phone Lock feature is enabled, the phoneis locked and you must enter the phone passwordeach time the phone is switched on.The password is factory set to “00000000.” Tochange the phone password, refer to the ChangePassword menu option (Menu 6.6.4) below.Once the correct password has been entered, youcan use the phone until you switch it off.The following options are available:Disable: you are not asked to enter the phonepassword when you switch the phone on.Enable: you are required to enter the phonepassword when you switch the phone on.Change PasswordThe Change Password feature allows you to changeyour current phone password to a new one. Youmust enter the current password before you canspecify a new one.The password is preset to “00000000” at thefactory. Once you have entered a new password,you are asked to confirm it by entering it again.