Getting Started202. Plug the adapter into a standard AC wall outlet.3. When charging is finished, unplug the adapterfrom the power outlet and from the phone bypressing the gray tabs on both sides of theconnector and pulling the connector out.Low Battery IndicatorWhen the battery is weak and only a few minutesof talk time remain, you will hear a warning toneand a message will be repeated at regularintervals on the display:When the battery becomes too weak for thephone to operate, it switches off automatically.**Warning**Low BatteryMenu Ph.BookGetting Started21Switching the Phone On/Off1. Open the folder.2. Hold down the key until the phoneswitches on.3. If the phone asks for a password, key in thepassword and press the OK soft key. The phonepassword is factory set to “00000000.” Forfurther details, see page 108.4. If the phone asks for a PIN, key in the PIN andpress the OK soft key. For further details, seepage 109.The phone searches for your network and whenit finds the network, the idle screen, illustratedbelow, appears on each display. Now, you canmake or receive a call.Note: The display language is factory set to English.To change the language, use the Languagemenu option (Menu 4.5); for further details,refer to page 80.5. When you wish to switch the phone off, holddown the key until the power-off image isdisplayed.Service Provider07:30 AMWed Jul 31Menu Ph.Book07:30Wed/31 AM