214Activating Visibility Press ➔ and then tap (Settings) ➔Wireless and network ➔ Bluetooth settings ➔ Visible.The device is now activated for discovery other devices fora period of time determined by the value set within theVisible time-out menu.Note: Your device visibility is based on the time set within the Visibletime-out field (2 minutes, 5 minutes, 1 hour, or Never). This valueappears as a countdown within this Visible time-out field.Scanning for DevicesThis option allows you to scan for active Bluetooth devices so youcan pair with them.1. Press ➔ and then tap (Settings) ➔Wireless and network ➔ Bluetooth settings ➔Scan for devices. Your phone begins scanning and lists anydiscovered devices in the Bluetooth devices section.2. Tap a device name to pair with the device.Important!: Some Bluetooth devices are secured and require a PIN number toconfirm and pair with them.3. Enter a PIN to pair with the device, if one is required, andtap OK.USB Utilities1. Press ➔ and then tap (Settings) ➔Wireless and network ➔ USB utilities ➔ Connect storage toPC.2. If prompted, tap OK to turn USB debugging mode off.3. Plug in a compatible USB cable to begin using the devicefor mass storage mode.USB TetheringThis option allows you to share your phone’s mobile dataconnection via a direct USB connection between your phone andcomputer. A wireless version of this same functionality would bethe Mobile AP feature.Note: You can not mount your phone’s microSD card to your computer whileusing the USB tethering feature. If additional software or USB driversare required, navigate to: http://www.samsung.com/us/support/downloads . Press ➔ and then tap (Settings) ➔Wireless and network ➔ USB tethering and Mobile HotSpot.For more information, refer to “USB Tethering” on page 202.
