Samsung SGH-Z300 User Manual

Also see for SGH-Z300: User manual Service manual

Contents

Menu functions Settings (Menu 3)Sending data via Bluetooth1. Activate the Bluetooth feature.2. Select the application in which the item you wantto send is stored.3. Scroll to the item and press <Options>.4. Select Send → Via bluetooth.The phone searches for devices within range anddisplays a list of available devices.5. Select a device.6. If necessary, enter the Bluetooth PIN needed forpairing and press <OK>.Receiving data via BluetoothTo receive data via Bluetooth, your phone’sBluetooth feature must be active.1. If an unauthorised Bluetooth device sends datato your phone, press <Yes> to allow the deviceto access your phone.2. Press <Yes> to receive data.• Align the IrDA port on thephone with the IrDA porton the other device.If there is no communicationbetween your phone and theother IrDA-compliant devicewithin 60 seconds ofactivating the feature, it isautomatically deactivated.Network (Menu 3.6.3)Use this menu to change the settings for connectingto your cellular network.• Network selection: select to eitherautomatically or manually select the networkused when roaming outside of your home area.You can select a network other than your homenetwork only if there is a valid roamingagreement between the two.• Network mode: select the network you use.