Getting Connected 85• Description: Enter a name for the connection.• Connects to: Select a network type for which the connection isused.• Access point: Enter the information provided by your systemadministrator.• User name: Enter your user name for the GPRS network.• Password: Enter your password.• Authentication Type: Select an authentication method for GPRSconnections.• Primary DNS: Enter the primary domain naming system (DNS)address.• Secondary DNS: Enter the secondary DNS address.• IP address: Enter the Internet Protocol (IP) address.Note: If you are not sure about the information to enter, ask your networkadministrator.5. Press the Done soft key when you are finished.Creating a proxy connectionYou can use a proxy connection to gain access to the Internetover an existing connection to your corporate network.1. On the Home screen, select Start ➔ More ➔ Settings ➔Connections ➔ Proxy and press the key.2. Highlight New in the Proxy menu list.-Or-3. Press the Menu soft key and select Add.4. Enter the requested information:• Description: Enter a name for the connection.• Connects from: Select the type of network from which you willconnect.• Connects to: Select the type of network to which you will connect.• Proxy (name:port): Enter the proxy server name and port numberin the form.• Type: Select a network type for which the proxy connection is used.• User name: Enter your user name for the network to which you willconnect.• Password: Enter your password.Note: If you are not sure about the information to enter, ask your serviceprovider.5. Press the Done soft key when you are finished.Creating a VPN connectionIf your company has set up a virtual private network (VPN), youcan create a VPN connection to gain access to your corporatenetwork over an Internet connection.i627.book Page 85 Wednesday, February 18, 2009 3:26 PM