Samsung SH09AW8 Owner's Instructions Manual

Samsung SH09AW8 Owner's Instructions Manual Manual pdf 11 page image

Heating Your RoomE-11ENGLISHYou must select the Heat mode if you wish to adjust the:◆ Heating temperature◆ Fan speed when heating1 If necessary, press the button.Result: ◆ The operation indicator on the indoor unit lights up.◆ The air conditioner starts up in the mode selectedwhen the unit was last used.◆ The indoor unit beeps.The air conditioner is fitted with a protection mechanismto prevent the unit from being damaged when it is startedimmediately after being:◆ Plugged in◆ StoppedIt will start up normally after three minutes.2 If the is not displayed at the top of the remote control, press thebutton on the remote control one or more times until it appears.Result: ◆ The indoor unit beeps each time you press the button.◆ The air conditioner runs in the Heat mode.NNNN oooo tttt eeee You can change modes at any time.3 To adjust the temperature, press the button one or more timesuntil the required temperature is displayed.Possible temperatures are between 16°C and 30°C inclusive.Result: ◆ Each time you press the button:- The temperature is adjusted by 1°C- The indoor unit beeps◆ If the room temperature reaches the set temperature(selected temperature+5°C), the air conditioner stops heating,but the fan is still operating.◆ The air conditioner starts heating, provided that the roomtemperature is lower than the desired temperature(selected temperature+3°C).4 Select the fan speed by pressing the button one or more timesuntil the required setting is displayed:Automatic (rotated : )LowMediumHighMaximumResult: ◆ Each time you press the button, the indoor unit beeps.◆ For the first three to five minutes, the fan operates veryslowly until the air has been sufficiently warmed. Once thecorrect temperature has been reached, the fan is automaticallyset to the required speed.5 To control the direction of the air flow, refer to pages 16 and 17.IMPORTANT