Selecting the Automatic Operating ModeE-9ENGLISHYou can start the air conditioner in Auto mode from your remotecontrol. In the Auto mode, the cooling and heating operation isselected automatically. You can also raise or lower the temperatureand the fan speed in the Auto mode.1If the is not displayed at the top of the remote control,press the button on the remote control one or more times until itappears.Result: ◆ The indoor unit beeps each time you press the button.◆ The air conditioner runs in the Auto mode.◆ The Auto mode cools and heats the room in optimum conditionby adjusting the indoor temperature depending on the settemperature.◆ The mode may change from cooling into heating, from heatinginto cooling depending on the current temperature duringoperation.2You can change modes at any time.If necessary, press the button.Result: ◆ The operation indicator on the indoor unit lights up.◆ The air conditioner starts up in the mode selectedwhen the unit was last used.◆ The indoor unit beeps.The air conditioner is fitted with a protection mechanism toprevent the unit from being damaged when it is startedimmediately after being:◆ Plugged in◆ Stoppedlt will start up normally after three minutes.IMPORTANTNNNN oooo tttt eeeeTo adjust the temperature, press the button one or more timesuntil the required temperature is displayed.Possible temperatures are between 16°C and 30°C inclusive.Result: ◆ Each time you press the button:- The temperature is adjusted by 1°C- The indoor unit beeps3