Temperature and Humidity RangesThe following table indicates the temperature and humidity ranges within which the air conditioner can be used.If the air conditioner is used at... Then...High temperatures The automatic protection feature may be triggered and the air conditioner stopped.Mode Outdoor Temperature Indoor Temperature Indoor HumidityHeating 0°C to 24°C approx. 27°C or less -Cooling 19°C to 43°C approx. 16°C to 32°C approx. 80% or lessDrying 19°C to 43°C approx. 16°C to 32°C approx. -❇ If the outdoor temperature is as low as 0°C, the heating capacity drops up to 70~80% depending on theoperating condition.If the cooling operation is used at over 32°C(indoor temperature), it does not cool at its full capacity.Low temperatures A water leak or some other malfunction may occur if the heat exchanger freezes.High humidity levels Water may condense on and drip from the surface of the indoor unit if it is used for long periods.E-23ENGLISHOperating Your Air Conditioner Without the Remote ControlYour air conditioner can be operated directly from the indoor unit ifthe remote control is lost or broken.1 To switch the air conditioner on, press the ON/OFF switch on the rightside of the indoor unit.Result: ◆ The OPERATION indicator on the indoor unit comes on.◆ The indoor unit beeps.◆ The air conditioner starts up in the most suitable mode forthe room temperature. The mode may change from coolinginto heating, from heating into cooling depending on the currenttemperature during operation:Room Temperature Operating ModeLess than 24°C Heat24°C or above Cool2 To switch the air conditioner off, press the ON/OFF switch again.NNNN oooo tttt eeee Even if the air conditioner has been switched on via theON/OFF switch, operations can still be controlled using theremote control as usual.