Wireless network setup1532. Using a Network-Connected Machine3 Read and accept The software End User License Agreement andUsing Enhanced Features and Participating in Printer UsageInformation Collection Program (optional). Then, click Next.4 Select Configure the wireless network connection using USB cableon the Printer Connection Type screen. Then, click Next.5 After searching, the window shows the wireless network devices. Selectthe name (SSID) of the access point you want to use and click Next.If the wireless network is already set up, the Wireless NetworkInformation window appears. Select I want to install software withthe current settings. (Recommended). Then, click Next.If you cannot find the network name you want to choose, or if you want toset the wireless configuration manually, click Advanced Setting.• Enter the wireless Network Name: Enter the SSID of the access point(SSID is case-sensitive).• Operation Mode: Select Infrastructure.• Authentication: Select an authentication type.Open System: Authentication is not used, and encryption may or maynot be used, depending on the need for data security.Shared Key: Authentication is used. A device that has a proper WEP keycan access the network.WPA Personal or WPA2 Personal: Select this option to authenticate theprint server based on a WPA Pre-Shared Key. This uses a shared secret key(generally called Pre Shared Key pass phrase), which is manuallyconfigured on the access point and each of its clients.• Encryption: Select the encryption (None, WEP64, WEP128, TKIP, AES,TKIP AES).• Network Password: Enter the encryption network password value.• Confirm Network Password: Confirm the encryption networkpassword value.• WEP Key Index: If you are using WEP Encryption, select the appropriateWEP Key Index.The wireless network security window appears when the access point hassecurity settings.Enter the Network Password of the access point (or router).
