106If you connect the USB cable to a USB port on your PC and then turn onthe power, the camera will automatically switch to “computer connectionmode”. In this mode, you can download stored images to your PC throughthe USB cable. Camera settings for connection1. Turn on the camera2. Connect the camera and computer withthe supplied USB cable.3. Turn on the computer. The camera andcomputer are connected.4. External device selection menu willdisplay on the LCD monitor.5. Select the [Computer] by pressing theUp/Down button and press the OK button.OK button.OKStarting PC modeStarting PC mode Connecting the camera to a PC If you selected [Printer] in Step 5, when you connect the camera to yourcomputer, the [Connecting Printer] message will be displayed and theconnection will not be established. In this case, disconnect the USB cable,and then follow the procedure from Step 2 and onward. Disconnecting the camera and PCRefer to page 108~109 (Removing the removable disk).
