074SETUP1 (SETUP1 ( )))Start up imageStart up imageYou can select the image that is first displayed on the LCD monitorwhenever the camera is turned on.– Sub menus: [Off], [Logo], [User Image]– Use a saved image for the start-upimage with the [Start Image] in the[RESIZE] menu in the play mode.– The start-up image will not be deletedby [Delete] or [Format] menu.– The User images will be deleted by[Reset] menu.LCD brightnessLCD brightnessYou can adjust the LCD brightness.– Sub menus: [Auto], [Dark], [Normal],[Bright]Quick viewIf you enable Quick View before capturing an image, you can view theimage you just captured on the LCD monitor for the duration set in the[Quick View] setup. Quick view is possible only with still images.– Sub menus[Off]: The quick view functioncan’t be activated.[0.5, 1, 3 sec]: The captured image isbriefly displayed duringthe selected time.LCD saveIf you set the [LCD save] to On and the camera isn’t operated during thespecified time, the LCD monitor will be turned off automatically.– Sub menus[Off]: The LCD monitor will not beturned off.[On]: If the camera isn’t operatedduring the specified time (about30 SEC.), the camera powerwill be idle (Camera statuslamp:Blinking) automatically.
