2322Using the Auto Answering (Continued)● Record the message (up to 20 seconds).● To stop recording● Press button.● The recorded message isplayed once.● The auto answering is available only with the base setYou will then hear abeep tone along with arecorded voice.To stop▶ If you have not recorded any message, the message prerecorded on thetelephone when the auto answering machine was turned on is selected.▶ The message is too short (less than 3 seconds).In this case, the message was not recorded. So, you have to record it again.▶ If the message quality is not good, it is because you recorded the messagetoo close to or too far from the mike.Record the message at a distance of about 30cm from the mike.Selecting the message from the prerecorded auto answering greeting messages1 234I’m not ableto take yourcall now.Please call againaround 8 o’clock.If the message is not recordedTo record the auto answering greeting message (in the standby state)��When you finished recording the auto answering greeting message, thescreen displays as shown in the following picture.Message preset in thetelephoneMessage yourecordedMike● Press and hold RECORDGREETING until the unitbeeps.