14 15● If the remote set is not on thecharger, press button andtalk.When the extension rings,place the handset.When the extension rings,press button.While the base setis busy (handsetcall)When the base setunit is busy(speakerphone call)Press button and when the extensionrings, place the remote set on the charger.( If you press button when the extension rings, theextension call is cancelled.)When theextension ringsWhen theextension ringsPick up the phone, pressbutton, and talk.Transferring a call toTransferring a call to● Or, press button andtalk.Pick up the handset and talk.12 312 3You can transfer the call from a remote set to another. Press button and then the desired remote set number.When an additional remote set is registeredPress button and then the desired extension number.(If you do not press an extension number, all registered remote sets will ring.)When an additional remote set is registered����When theremote set isbusy � �● If pick up the base set handset andtalk, the call is automaticallytransferred.● If you pick up the base set handsetand talk, the call is automaticallytransferred.When you press button onthe remote set after theextension rings, a call isconnected with the base setspeakerphone.● If you press or do not press anynumber within 2 seconds, allremote sets are called.Press the remote set number withwhich you want to make anextension call.Making an extension call from toMaking Extension Calls123If you press button at the base setafter the extension rings, you can talk over thebase set speakerphone.12● You can make a call between the handset or speakerphone of the base set and the remote seteven when the line is not busy.At this time, the call is not charged.(Press the buttons in the following order.)Making an extension call from to (Press the buttons in the following order.)If there is an incoming call during an extension call, the telephone does not ring.If the separately installed telephone rings, you can answer the call after finishing the extension call∙Press the button in thestandby state.∙Press the button in thestandby state.Transferring a CallIf the other party does not pick up the phone when you transfer the call, the call is returned to theoriginating remote set after 30 seconds. If the remote set is on the charger, however, the ringingcontinues for another 30 seconds and the call is automatically terminated.