Section 3: Using PCS Service Features3B: PCS Vision 121Net GuardWhen you first connect to the Internet, the Net Guard willappear to confirm that you want to connect. This feature helpsyou avoid accidental connections. You can disable the NetGuard in the future by selecting Always Auto-Connect when theNet Guard is displayed.To change your Net Guard settings:1. Press for Main Menu.2. Press for Settings.3. Press for Vision.4. Press for Net Guard5. Press the navigation key up or down to select On or Off.6. Press to Save.Note: When enabled, the Net Guard appears only once per session.The Net Guard does not appear if the phone is merely re-connecting dueto a time-out.PCS Vision Connection Status and IndicatorsYour phone's display lets you know the current status of yourPCS Vision connection through indicators which appear at thetop of the screen. The following symbols are used:Your PCS Vision connection is active (data is beingtransferred). Incoming voice calls go directly to voicemail;outgoing voice calls can be made, but the PCS Visionconnection will terminate.Your PCS Vision connection is dormant (no data is beingsent or received). Though not currently active, whendormant the phone can restart an active connectionquickly; voice calls can be made and received.Your phone is not currently able to access PCS Visionservice features.If no indicator appears, your phone does not have a currentPCS Vision connection. To launch a connection, see “Launchinga PCS Vision Connection” on page 120.