Section 2: Understanding Your PCS Phone2A: Your PCS Phone - The Basics 20Using One/Two/Three Touch Speed DialingWith this feature, you can automatically call Speed Dial entriesusing one key press for locations 1-9, two key presses forlocations 10-99, or three key presses for locations 100-300.To use One-Touch Dialing for Speed Dial locations 1-9: Press and hold the appropriate key for a few seconds. The displayconfirms that the number has been dialed when it shows “Calling”.To use Two-Touch Dialing for Speed Dial locations 10-99:1. Press the first digit.2. Press and hold the second digit for a few seconds. Thedisplay confirms that the number has been dialed when itshows “Calling”.To use Three-Touch Dialing for Speed Dial locations 100-300:1. Press the first digit.2. Press the second digit.3. Press and hold the third digit for a few seconds. Thedisplay confirms that the number has been dialed when itshows “Calling”.Dialing OptionsDialing options are displayed when you enter numbers using the keypad.To select an option press and the number on the keypad thatcorresponds with the desired choice. (1) Talk is used to dial the phone number. (If you areroaming and have the Call Guard feature activated, you mustthen press . See "To Place Roaming Calls With CallGuard On:" on page 49. (2) Save to save the phone number in your InternalPhone Book. See "Finding Internal Phone Book Entries" onpage 73. (3) Find is used to locate and display Internal Phone Bookentries that contain the numbers entered. See "FindingInternal Phone Book Entries" on page 73. (4) Hard Pause is used to insert a hard pause. (5) 2 Second Pause to insert a 2-second pause.