Section 14110 Using the Voice Services of your Sprint PCS PhoneRecording a voice memoTo record a voice memo in Standby mode:1. Press and hold the key on the side of the phone.The message “Recording” displays, along with thetimer. You must continue to hold down the key torecord (recording is stopped when the key is released).2. Record the voice memo by speaking into themicrophone.3. To stop recording, release the key. A menu for thecurrent voice memo becomes available.4. To save the voice memo with the default date / timestamp, press or do nothing. Your phone willautomatically save the voice memo stamped with thedate and time after about one minute. Other options onthe current voice memo include: to Add Label. The default label for a voice memois the date / time stamp. You can create your own labelusing the alphanumeric keys. Just start entering yourlabel and press when you are ready to save it. to Continue. Press and hold to continuerecording. You can add to the voice memo, but youmust do it before you save the voice memo. After a voice memo is stored, the memo cannot beappended or added to. to Erase the voice memo.Reviewing a voice memoTo review a voice memo:1. From the main menu press for Voice Dial.2. Press for Review. The phone displays the label forvoice memo 1, begins to play voice memo 1 anddisplays a list of four reviewing options. All voicememos will play in order until you press , , orselect one of the following options: Press to Replay the voice memo. Press to immediately Erase the voice memo.
