Section 1188 Changing your Phone’s SettingsChanging Your Phone Back to Voice Calling1. From the main menu press for Setup/Tool.2. Press for Data/Fax In.3. Use the scroll keys to select “Voice Call Only”.4. Press to Save the setting. The screen displays “Noincoming data/fax calls can be received”. Your phonethen returns to Standby mode.Ending a callAlthough you can end a call in various ways, for example,closing the phone, always close the connection through theapplication on your computer. Your phone will return toStandby mode. Disconnecting the data cable or turning offyour phone will end a wireless web call, but may disruptyour computer.Setting the TALK Key One-Touch AccessThe key is set at the factory to access your outgoingcall log when pressed from Standby mode. This “one-touchaccess” can instead be set for the Internal Phone Book ifyou prefer. It’s easy to set.1. From the main menu press for Setup/Tool.2. Press for Talk Key.3. Use the scroll keys to select “PhoneBook” or “Calls”.4. Press to Save the setting or to return to theprevious screen.Note:The phone alwayspowers up in Standbymode, even if it waspowered down inData/Fax mode. Thephone also returns toStandby mode if the datacable is disconnected.
