Section 2G: Using the Phone’s Scheduler and Tools 135Scheduler and ToolsConnect to PCThis option allows you to transfer data between your phone and aPC via a USB data transfer cable.To connect the phone to a PC:1. Connect one end of the USB Data Cable to your PC’s USBport.2. Plug the other end of the USB Data Cable into your Power/Accessory Interface Connector located on the side of the phone.3. Select Menu > Tools > Mass Storage > Connect to PC.Note: This procedure requires that a compatible memory card be installedinto the phone prior to connection with the PC. (See “Using a microSD Memory Card in Your Phone” on page 26.)IncorrectCorrectCameraInterfaceConnector136 Section 2G: Using the Phone’s Scheduler and ToolsTo display the current memory allocation:1. Select Menu > Tools > Mass Storage >Memory Info.2. Choose one of the following and press: All - both phone and memory cardmemory Phone - only the phone’s memoryallocations Card - only the card’s memoryallocations3. Review the Total memory size, CurrentUsed, and Total Available memoryremaining, and select Done ( ) toexit this screen.Using the CalculatorYour phone comes with a built-in calculator.To use the calculator:1. Select Menu > Tools > Calculator. (The phone then deactivatesthe Main LCD, and flips over to the Phone Display Screen.)2. Enter the first numbers using your phone’s keypad. Press the Navigation key up forMultiplication (x). Press the Navigation key down forDivision (÷). Press the Navigation key left for Subtraction (-). Press the Navigation key right for Addition (+).LSLSMENUOK
