Section 2I: Using the Built-in Camera 163Camera Color Tones to select a wide variety of color tones for thepicture (Auto, Monochrome, Green, Sepia, or Aqua). (Thedefault setting is Auto). Controls to select from the following options: Brightness to adjust brightness level. White Balance to adjust white balance based on changingconditions (Auto, Sunny, Cloudy, Tungsten, Fluorescent, orManual). (The default setting is Auto). Launch to select from the following options: Review Pictures to open your media storage folder andreview your previously taken photos. Camcorder (to switch to Video mode, see “RecordingVideos” on page 165 for details.) Settings to alter the camera settings (see “Selecting CameraSettings” on page 164.)Setting the Camera Self TimerTo activate the self timer:1. From camera mode, select Options ( ).2. Select Self Timer and highlight the length of delay you want thetimer to use (5 sec or 10 sec) and press . (The defaultsetting is Off.)3. Select Capture ( ) when you are ready to start the timer.4. Get ready for the picture. (When the timer is started, the phonewill initiate a corresponding number of audible beeps that soundoff every second to indicate a countdown.)To cancel the self-timer after it has started: Press Back ( ).URSRSLSLSBACK164 Section 2I: Using the Built-in CameraSelecting Camera SettingsTo select your camera settings:1. Select Menu > Pics/Videos > Camera >Options.2. Use the Navigation Pad to select one ofthe following options and press . Resolution to select a picture’s filesize (1280x960, 640x480,320x240, or 176x220). Quality to select the picture qualitysetting (Fine, Normal, or Economy). Shutter Sound to select a shutter sound (Off, Shutter1—3,or Say Cheese). As you select an option using yourNavigation key, a representative audio file is played. View Mode to select between Wide Screen (landscape) orFull Screen (portrait) format. Status Bar to turn the status bar On (Show) or Off (Hide) when in camera mode. These descriptive iconsare then shown on the right of the screen. They include:Resolution, Storage destination, Timer status, and WhiteBalance setting. Save Picture To selects the destination for the image files(Phone or Memory Card).