Samsung SRD-440 User Manual

Contents

50_ using the DVRusing the DVRMotion DetectionYou can set target detection region and motion, as well as the alarm signal output.When the motion detection region is set, it detects motion within the area.Using the mouse may help make setup easier.1. Use the up/down buttons () in <Event> window tomove to <Motion Detection>, and press [ENTER] button.A window of motion detection area setup appears.2. Use direction buttons (◄ ►) to move to a desireditem, and set the value.• Mode : Sets whether to activate motion detection.• Sensitivity : Sets the sensitivity level of the motion detection.• Alarm : Sets the alarm output method. For further information on alarm output, refer to “HDD Alarm >Alarm”. (Page 41)• Alarm Duration : Sets the duration of alarm signal and alarm sound.3. When the motion detection setup is done, press <OK>.Setting the Motion Detection AreaSelect <Motion Region>.When “Motion Region” window appears, select achannel for detection and set the area of motiondetection.• To set the area in “Motion Region” windowIn the “Motion Region” window, select desired regionfrom < >.• To set the area using <Individual> selectionIn the “Motion Region” window, you can select cellsindividually by using <Individual>.Motion RegionOK CancelApply to All CHCH1IndividualWhen selected <Individual>, “Motion Region” window disappears and you can select cells one by one.When the motion area setup is done, Right-click to select <Menu> in the context menu or the [MENU]button on the remote control to display the “Motion Region” window again.- Select : Selected cell is set to be a part of motion detection area.- Unselect : Selected cell is removed from the motion detection area.- Inverse : Unselected cells are set to be the motion detection area.- Menu : After selecting individual motion areas, move to the “Motion Region” window. If selected <Apply to All CH>, selected motion area is applied to all channels.When the motion detection setup is done, press <OK>.Motion DetectionOK CancelCH Mode  Sensitivity  Alarm  Alarm Duration 1 OFF  Level10(High)  None 10 sec 2 OFF  Level10(High)  None 10 sec 3 OFF  Level10(High)  None 10 sec 4 OFF  Level10(High)  None 10 sec Motion RegionSelectUnselectInverseMenu