58_ using the DVRusing the DVRMailing ServiceYou can send an e-mail to a DVR-registered user at a specific time interval, or if an event occurs.M If an event occurs with a channel where the camera’s video is set to <OFF> or the remaining recording count is setto <OFF>, only the text notification will be sent to the applicable email address.SMTP SettingSets the SMTP mail server.Using the mouse may help make setup easier.1. In the <Network> setting window, press the up/down() button to move to <Mailing Service> and press the[ENTER] button.2. Select <SMTP>.You will see the SMTP setting window.3. Use direction buttons (◄ ►) to move to a desired itemand set the value.• ServerType : Displays the connected server type.• Server : Enter a server to connect to.• Port : Sets the communication port.• Use Authentication : Check this if the SMTP server uses user authentication.The account input box will be activated.• User : Enter a user to use authentication when connecting to the SMTP server.• Password : Enter the password of the SMTP server user.• Secure Transfer : Select one from <Never> and <TLS(if Available)>.• Sender : Use the virtual keyboard to provide the email address. Refer to “Using Virtual Keyboard”. (Page 30)• TEST : Conducts the test on the server settings.4. When the SMTP setting is done, press <OK>.Event SettingYou can set the interval and type of the event that will be sent to the user.Using the mouse may help make setup easier.1. In the <Network> setting window, press the up/down() button to move to <Mailing Service> and press the[ENTER] button.2. Select <Event>.3. Use direction buttons (◄ ►) to move to a desired itemand set the value.• Event Interval : Set the event interval. If a series of events occurs, the e-mail will be sent at the specifiedinterval, not on each event.• Use Event Transfer : Select an event type to send if an event occurs.If the selected event occurs, the e-mail will be sent to the group that has the recipient authority.4. When the event setting is done, press <OK>.Mailing ServiceSMTP EventOK CancelUse AuthenticationGroup Recipient ServerType SMTP mail Server Server Port 25 User Password Secure Transfer Never Sender ex. user@example.netTESTMailing ServiceSMTPOK CancelRecipient Event Interval 10 min Use Event TransferSensor MotionChange P/W HDD Info Video LossPower On/Off Manual RecordEvent Group