English _59 USING THE DVRGroup SettingYou can set the group to whom the e-mail is sent, and specify the permission for each group.You can add recipients for each group in the <Recipient> menu item.The recipient is set separately from the DVR user group.Using the mouse may help make setup easier.1. In the <Network> setting window, press the up/down() button to move to <Mailing Service> and press the[ENTER] button.2. Select <Group>.3. Use direction buttons (◄ ►) to move to a desired itemand set the value.• Add : Select <Add> and use the virtual keyboard to add agroup. Refer to “Using Virtual Keyboard”. (Page 30)• Delete : Deletes the selected group.• Rename : You can reset the recipient permission of an existing group.• Recipient Permission : Set the permission of the recipient group.4. When the group setting is done, press <OK>.Recipient SettingYou can add/remove a recipient(s) to/from the specified group and edit the group if necessary.Using the mouse may help make setup easier.1. In the <Network> setting window, press the up/down() button to move to <Mailing Service> and press the[ENTER] button.2. Select <Recipient>.3. Use direction buttons (◄ ►) to move to a desired itemand set the value.• Add : You can select a recipient name, e-mail address orgroup.You should have created a group in the <Group> menuitem before you can add a user to the group. For inputting the recipient name and email address, refer to“Using Virtual Keyboard”. (Page 30)4. When the recipient setting is done, press <OK>.Mailing ServiceSMTPOK CancelEvent Group RecipientGroup Name e-Mail Address DelAdd Group All GroupPrevious/ Next PageMailing ServiceGroupSMTPOK CancelRecipient Group Recipient PermissionSensor MotionChange P/W HDD Info Video LossPower On/Off Manual RecordEventAdd Delete RenameMailing ServiceSMTPOK CancelEvent Group RecipientGroup Name e-Mail Address DelAdd Group ABCPrevious/Next PageAdd recipientOK Cancel Name Email Select Group ABC