68_ system managementsystem managementLOOP SETTING [ADD – SERIAL COMMUNICATION](This is not available in SAMS Pro Lite.)From the upper menu, select [System Management] > [Loop Setting].Click Add < > in the tool bar.Select a [Site].Enter the [Loop].Select a [Communication Type]. Select either one of [Serial Communication] or [Network Communication].Select the [Serial Communication] in this step.Select [Serial Communication] if communication between the device and SAMS Pro is serial. Select [NetworkCommunication] for networks such as LAN connections.Check [Whether to use]. If unchecked, devices connected to the selected loop will not communicate.Set the interval of polling in [Polling Speed (ms)]. It is recommended to set to 200 ms even the optimal pollingspeed may vary depending on devices.Access controllers will communicate with the management program for data transfer in polling method. Pollingspeed means the interval between data requesting polls of the SAMS Communication Server Pro to devices.Move to the [Serial Communication] tab.1.2.3.4.5.J 6.7.J 8.
