Samsung SV-DVD3 Instruction Manual

Also see for SV-DVD3E: Instruction manual Instruction manual Service manual Service manual

Contents

VCRVCRVCRVCRGBSelecting the Audio Output ModePlaying a Cassette in Slow Motion37You can select the mode in which the sound is reproduced on theloudspeakers and AV outputs. The following options are available.Option DescriptionL Used to listen to the sound on the left Hi-Fi channel.R Used to listen to the sound on the right Hi-Fi channel.MIX Used to listen to the mixed sound of the Hi-Fi and normalchannels.MONO Used to listen to the sound on the normal mono channel.L R Used to listen to Hi-Fi stereo sound on the left and rightchannels.➢ When playing back tapes recorded in Hi-Fi, thesound switches to Hi-Fi after five seconds of Mono.To select the sound mode, simply press the AUDIO button on the remotecontrol until the required option is displayed.You can play a cassette in slow motion.➢ No sound is heard when playing back a cassette in slowmotion.1 Press: ❿ll to start playing the cassette ❿ll button one more time to make PAUSE mode. ❿❿ to start SLOW mode. ❿❿ or ➛➛ button as many times as required to decrease orincrease the speed respectively To return to the normal speed, press the ❿ll button twice.2 When playing back in slow motion, picture interference may occur.Press the TRK ( or ) buttons to minimize this effect.☛ When you have been using the Slow Motion function formore than about five minutes, the DVD-VCR willautomatically play to protect the: Cassette Video headsL R MIXL R MONOPlaying a CassetteGBAdjusting Picture Alignment AutomaticallyAdjusting Picture Alignment Manually36The Picture Adjustment feature allows you to adjust the alignmentmanually to obtain the best possible picture.When noise bars or streaks appear during playback, adjust alignmentmanually by pressing the TRK ( or ) buttons until the picture is clearand stable.Result: The tracking bar appears. The image is adjusted. The tracking bar disappears when you release the button.This function allows you to play back any pre-recorded cassette.1 Switch on both the television and your DVD-VCR.2 Insert the video cassette to be played. If the safety tab on thecassette is intact, press ❿ll.Otherwise, the cassette is played automatically.➢ When a cassette is loaded, the tape position is optimizedautomatically to reduce disturbance (Digital Auto Tracking).When playing a cassette, if the end of the tape is reached,the cassette is rewound automatically.NTSC tapes can be played back but cannot be recordedwith this DVD-VCR.3 To... Then press...Stop the playback (STOP).Eject the cassette (EJECT).The Picture Alignment feature enables you to optimize the tapeposition automatically to obtain the best possible picture.When noise bars or streaks appear during playback, adjust picturealignment by pressing the A.TRK button.Result: The tracking bar appears. The picture is automatically adjusted. The tracking bar disappears when digital auto tracking hasbeen completed.REC DISC MENUF.ADV/STEPSETUP/ENTERSELECT COPYRECEJECTAUX4 5 67 8 903D SOUND SCREEN FIT CLEARDVD VCR INPUT SEL.ZOOMVIEWTRK PROGDISPLAYMODE/REPEATDIGESTSVHSCLOCK/COUNTERANGLEA.TRK3 23DVD VCR INPUT SEL.VIEWTRK PROGDISPLAYREC DISC MENUF.ADV/STEPDIGESTVCR2 34 5 67 8 90SHUTTLEAUDIO3D SOUND SCREEN FIT CLEARDVD VCR INPUT SELZOOMVIEWMODE/REPEATSVHSTV/VCRCLOCK/COUNTERANGLEA.TRKREC DISC MENUF.ADV/STEPSETUP/ENTERDVD VCR INPUT SEL.VIEWTRK PROGDISPLAYREC DISC MENUF.ADV/STEPDIGEST2211