Samsung SV-DVD3 Instruction Manual

Also see for SV-DVD3E: Instruction manual Instruction manual Service manual Service manual

Contents

DVD DVDGB49GB48ParentalRating Control is a password protected system that allows you toblock playback of DVDs based on their content. The system uses aneight level rating system.• If you try to play a DVD that exceeds the selected rating, an errormessage will appear.• Not all discs are rated.1 Open “MAIN MENU”With the DVD in stop mode, press the SETUP button.2 Select “DVD”Using the up/down and left/right buttons, move the selection cursorto “DVD SETUP,” then push ENTER to select.3 Select “Parental”Move the selection bar to “Parental,” then push ENTER to select.4 Select “Use Password”Move the selection arrow to “Use Password,” then press ➛ or ❿button to select from the following options:• No - Indicates that no password is required to view any DVDdisc or to change Rating Control options. No additional RatingControl settings are necessary.• Yes – Indicates that a password is required to view some DVDdiscs and to view Rating Control options. The menu will changeas shown.NOTES:• The first time “Require Password” is set to “Yes,” you will beprompted to enter a new password.• If the “Enter Password” screen appears, then “RequirePassword” has already been set to “Yes.” Please skip to Step 5.5 Enter PasswordEnter a 4-digit password using the 0–9 buttons on the remotecontrol.• Write your password down, and keep it in a safe place in caseyou need it to change your settings later.6 Select “Rating Level”Move the selection bar to “Rating Level,” then press ENTER toselect.7 Change Rating LevelUse the up/down to select one of the following ratings:• Level 8 Adult • Level 4• Level 7 • Level 3• Level 6 • Level 2• Level 5 • Level 1 Kids SafeAll ratings above the level you select will also be blocked, e.g., ifyou block Level 6, then Levels 7 and 8 will also be blocked.Press ENTER to confirm your selection.• If you forgot your password, press power on from a cold startwith no disc in the unit. Press the REW and F.F buttonssimultaneously on the front panel for 5 seconds. The “reset ok”message will appear. Press the STANDBY/ON button.MAIN MENUDVD SETUPRETURN "❷!!➛!!!❿ ENTERProgram Clock Install ExitDVD VCR Option LanguageDVDRETURN "❷!!!!!!!!!!ENTERDVD SETUPDisc Menu EnglishAudio EnglishSubtitle AutomaticParental UnlockedAudio OptionsDisplay OptionsRETURN "❷! ENTERPARENTAL CONTROLUse Password ➛!❿ NoRETURN PRESS 0-9CREATE PASSWORDEnter Password_ _ _ _RETURN "❷! ENTERPARENTAL CONTROLUse Password ➛!❿ YesRating Level 1Change PasswordRATING LEVELLevel 8 AdultLevel 7Level 6Level 5Level 4Level 3Level 2Level 1 Kids SafeIf your A/V receiver is equipped with a Dolby Digital decoder, yourDVD-VCR can output Dolby Digital 5.1 sound, but you MUSTenable this feature in the menu system to prevent damage to yourspeakers.NOTE: Select “Bitstream” ONLY if you have connected a DolbyDigital-equipped A/V receiver to the Digital Output(optical or coaxial) on the DVD-VCR back panel.1 Open “MAIN MENU”With the DVD in stop mode, press the SETUP button.2 Select “DVD”Using the up/down and left/right buttons, move the selection cursorto “DVD SETUP,” then push ENTER to select.3 Select “Audio Options”Move the selection bar to “Audio Options,” then press ENTER toselect.4 Set “Dolby Digital Output”Move the selection bar to “Digital Output” then press the rightbutton to select from the following options:• PCM - To use your DVD/TV with an A/V receiver NOT equippedwith a Dolby Digital decoder.• Bitstream – To use your DVD/TV with an A/V receiver equippedwith a Dolby Digital decoder.Digital OutputMAIN MENUDVD SETUPRETURN "❷!!➛!!!❿ ENTERProgram Clock Install ExitDVD VCR Option LanguageDVDRETURN "❷!!!!!!!!!!ENTERDVD SETUPDisc Menu EnglishAudio EnglishSubtitle AutomaticParental UnlockedAudio OptionsDisplay OptionsRETURN "❷AUDIO OPTIONSDolby Digital Output ➛ ❿ PCMMPEG-2 Digital Out PCMDTS OffDynamic Compression OnRETURN "❷! ENTER