Samsung SV-DVD3E Instruction Manual

Also see for SV-DVD3E: Instruction manual Instruction manual Service manual Service manual

Contents

GB23GB22Setting the DVD-VCR Output ChannelYour DVD-VCR output channel may need to be changed if thepictures suffer from interference or if your TV cannot find thepictures.Also, you can change the DVD-VCR output channel to adjust thefrequency in which information is displayed on the screen.1 Press SETUP on the remote control.Result: The MAIN MENU is displayed.2 Press the corresponding " , ❷ or ➛ , ❿ buttons to select theINSTALLATION option.3 Press the ENTER button to select this option.Result: The INSTALLATION menu is displayed.4 Press the " or ❷ buttons, until the VCR OUTPUT CH option isselected.5 Select the required output channel (CH21~CH69) by pressing the➛ or ❿ buttons.6 On completion, press RETURN twice to exit the menu.Then tune your television again (see page 14).Changing the Preset Station TableYou can rearrange the Station Table and give different programmenumbers to the stations listed according to your own preferences.1 Press the SETUP button on the remote control.2 Press the corresponding " , ❷ or ➛ , ❿ buttons to select theINSTALLATION option.3 Press the ENTER button to select this option.Result: The INSTALLATION menu is displayed.4 Press the corresponding " or ❷ buttons, until the MANUAL SETUP option is selected.5 Press the ENTER button to select this option.Result: The TV STATION TABLE menu is displayed.6 Press the corresponding " or ❷ buttons, until the required presetTV programme is selected.Result: The selected station is displayed at the same time onthe television screen.7 To change the programme number assigned to a station press theENTER button on the remote control (For example; To move a TVstation in programme 1 to programme 3).8 Press the " or ❷ buttons to select required position and the pressENTER again to swap the position.9 On completion, press the RETURN button three times to exit themenu.TV STATION TABLEPR CH NAME1 0032345"❷ ❿!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! SWAPPING:ENTERRETURN DELETE:CLEARTV STATION TABLEPR CH NAME123 00345"❷ ❿!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! SWAPPING:ENTERRETURN DELETE:CLEARMAIN MENUINSTALLATIONRETURN "❷!!➛!!!❿ ENTERProgram Clock Install ExitDVD VCR Option LanguageInstallINSTALLATIONAUTO SET UPMANUAL SET UPTV SYSTEM :GVCR OUTPUT CH :CH36RETURN "❷!!!!ENTERVCRVCR Selecting the RF OUT Sound Mode (B/G-D/K) VCRYou can choose the sound mode (B/G or D/K) according to the TVset connected to your VCR.1 Press SETUP on the remote control.Result: The MAIN MENU is displayed.2 Press the corresponding ",❷ or ➛, ❿ buttons to select theINSTALLATION option.3 Press the ENTER button to select this option.Result: The INSTALLATION menu is displayed.4 Press the " or ❷ buttons, until the TV SYSTEM option isselected.5 Press the ➛ or ❿ button to select G or K.6 On completion, press RETURN to exit the menu.MAIN MENUINSTALLATIONRETURN "❷!!➛!!!❿ ENTERProgram Clock Install ExitDVD VCR Option LanguageInstallINSTALLATIONAUTO SET UPMANUAL SET UPTV SYSTEM :GVCR OUTPUT CH :CH36RETURN "❷!!➛!❿GKINSTALLATIONAUTO SET UPMANUAL SET UPTV SYSTEM :GVCR OUTPUT CH :CH36RETURN ➛!❿!! "❷MAIN MENUCH21CH36CH69INSTALLATIONRETURN "❷!!➛!!!❿ ENTERProgram Clock Install ExitDVD VCR Option LanguageInstall