Samsung SV-DVD3E Instruction Manual

Also see for SV-DVD3E: Instruction manual Instruction manual Service manual Service manual

Contents

GBConnecting DVD-VCR to the TV using the Coaxial CableConnecting DVD-VCR to the TV using the RCA Cable11GBDeciding How to Connect DVD-VCR10To receive television programmes a signal must be received fromone of the following sources: An outdoor aerial An indoor aerial A cable television network A satellite receiver☛ Make sure that both the television and the DVD-VCR areswitched off before connecting the cables.1 Remove the aerial or network input cable from the television.2 Connect this cable to the 75Ω coaxial socket marked on therear of your DVD-VCR.3 Plug the coaxial cable supplied into the socket on yourDVD-VCR.4 Plug the other end of the coaxial cable into the connectorpreviously used for the aerial on the television.5 To obtain better quality pictures and sound on your television, youcan also connect your DVD-VCR to the television via the RCAcable (see section below) if your television is equipped with thistype of connection.TVYou must take into account various factors when connecting audio or video systems: Types of connectors available on your systems Systems connected permanently to the DVD-VCR (satellite receiver for example) ortemporarily (camcorder for example)Your DVD-VCR is equipped with the following connectors.Connector Location Type Direction Recommended UseLINE Rear Audio/Video RCA In/Out Television Other VCRAudio output Rear Audio RCA Out Audio out (DVD only)COMPONENT Rear RCA Out COMPONENT out (DVD only)outputS-VIDEO Rear S-JACK Out S-Video out (DVD only)outputDigital AUDIO Rear Optical Out Digital Audio out (DVD only)output coaxialOUT TO TV Rear 75 Ω Out TelevisioncoaxialIN FROM ANT. Rear 75 Ω In Aerialcoaxial Cable television network Satellite receiver☛ Whenever you connect an audio or video system to your DVD-VCR, ensure that all elementsare switched off.Refer to the documentation supplied with your equipment for detailed connection instructionsand associated safety precautions.DVD & VCRDVD & VCR32TV4DVD & VCRAerialRF coaxial cable23TVYou can connect your DVD-VCR to the television using the RCA cable if the appropriate input is availableon the television. You thus: Obtain better quality sound and pictures Simplify the setting up procedure of your DVD-VCR☛ Regardless of the type of connection chosen, you must always connect the coaxial cable supplied.Otherwise, no picture will be visible on the screen when the DVD-VCR is switched off. Make sure that both the television and the DVD-VCR are switched off before connecting the cables.1 Connect the coaxial cable as indicated in the above section.2 Connect one end of the RCA Audio/Video cable to the Video output and Audio L, R output socket on the rearof the DVD-VCR.3 Plug the other end into the appropriate connector on the television.