Samsung SV-DVD3E Instruction Manual

Also see for SV-DVD3E: Instruction manual Instruction manual Service manual Service manual

Contents

47GB46GBSetting Up the Audio Options1 With the unit in Stop mode, press the SETUP button on the remote.Result: The MAIN MENU is displayed.2 Press the corresponding $,❷ or ➛, ❿ buttons to select the DVDoption.3 Press the ENTER button to select this option.Result: The DVD SETUP menu is displayed.4 Use the $ or ❷ buttons to select Audio Options. Then press theENTER button.5 Use the $or ❷ buttons to select the desired item. Then press the➛ or ❿ buttons.• Dolby Digital OutPCM : Converts to PCM(2CH) audio.Select PCM whenusing the Analog Audio Outputs.Bitstream : Converts to Dolby Digital Bitstream (5.1CH).Select Bitstream when using the DigitalAudio Output.NOTE : Be sure to select the correct Digital Output orno audio will be heard.• MPEG-2 Digital OutPCM : Converts to PCM(2CH) audio. Select PCM when using theAnalog Audio Outputs.Bitstream : Converts to MPEG-2 Digital Bitstream(5.1CH or 7.1CH). Select Bitstream when usingthe DigitalAudio Output.• DTSOff : Doesn’t output digital signal.On : Outputs DTS Bitstream via digital output only.Select DTS when connecting to a DTS Decoder.• Dynamic CompressionOn : To select dynamic compression..Off : To select the standard range.➢ • How to make the SETUP MENU disappear or returnto menu screen during set up: Press RETURN button.• Manufactured under license from Dolby Laboratories.”Dolby” and the double-D symbol are trademarks ofDolby Laboratories.• “DTS” and “DTS Digital Out” are trademarks ofDigital Theater Systems, Inc.\DVD SETUPDisc Menu EnglishAudio EnglishSubtitle AutomaticParental UnlockedAudio OptionsDisplay OptionsRETURN $❷!!!!ENTERMAIN MENUDVD SETUPRETURN $❷!!➛!!!❿ ENTERProgram Clock Install ExitDVD VCR Option LanguageDVDRETURN $❷AUDIO OPTIONSDolby Digital Output PCMMPEG-2 Digital Out ➛➛ ❿❿ PCMDTS OffDynamic Compression OnDVDSetting Up the Parental ControlThe Parental Control function works in conjunction with DVDs thathave been assigned a rating - which helps you control the types ofDVDs that your family watches. There are up to 8 rating levels on adisc.1 With the unit in Stop mode, press the SETUP button on the remote.Result: The MAIN MENU is displayed.2 Press the corresponding $,❷ or ➛, ❿ buttons to select the DVDoption.3 Press the ENTER button to select this option.Result: The DVD SETUP menu is displayed.4 Use $ or ❷ to select Parental. Press ENTER. The ParentalControl screen appears.5 Use ➛ or ❿! to select Yes if you want to use a password. PressENTER. The Enter Password screen appears.6 Enter your password. The Re-enter Password screen appears toconfirm the password. Enter your password again. The ParentalControl screen appears.7 About the Rating Level :- The Rating Level will work only when Use Password is set toYes. To unlock the player, use ➛ or ❿ to select No. Use $or ❷to select Rating level. Press ENTER.- Use $ or ❷ to select the level(e.g. Level 6) and press ENTER.Discs that contain Level 7 will now not play.- To cancel the rating level, use ➛ or ❿ to select No in UsePassword.8 About the Change Password:- Use $ or ❷ to select Change Password. The ChangePassword screen appears.-Enter your new password. Re-enter the new password again.➢ • How to make the SETUP MENU disappear or return tomenu screen during set up; Press RETURN button.• If you have forgotten your password, see ForgetPassword in the Troubleshooting Guide.DVD SETUPDisc Menu EnglishAudio EnglishSubtitle AutomaticParental UnlockedAudio OptionsDisplay OptionsRETURN $❷!!!!ENTERMAIN MENUDVD SETUPRETURN $❷!!➛!!!❿ ENTERProgram Clock Install ExitDVD VCR Option LanguageDVDRETURN $❷! ENTERPARENTAL CONTROLUse Password ➛!❿ NoRETURN PRESS 0-9CREATE PASSWORDEnter Password_ _ _ _RETURN $❷! ENTERPARENTAL CONTROLUse Password YesRating Level 1Change PasswordRATING LEVELLevel 8 AdultLevel 7Level 6Level 5Level 4Level 3Level 2Level 1 Kids SafeDVDRETURN $❷! ENTER