Samsung Side-By-Side Refrigerator User Manual

Also see for Refrigerator: Owner's manual User manual User manual User manual Owner's instructions

Contents

English - 28• Delay Appliance Load (L3): The refrigeratorresponds to a DAL signal by providing amoderate load reduction for the duration of thedelay period.This function controls functions that consumea large amount of energy such as adjusting theCooling system, performing the defrost cycle,and making ice.- When the refrigerator operates in DAL (L3)mode, “L3” is displayed on the refrigeratordisplay.- DAL mode is automatically deactivated after itlasts for the received duration (max. 4.5 hours),or when the Override key is pressed.• Temporary Appliance Load Reduction (L4):The refrigerator responds to a TALR signal byaggressively reducing the load for a short timeperiod.This function reduces energy consumptionby stopping the compressor and controllingthe functions that consume a large amount ofenergy such as the defrost cycle and makingice.- When the refrigerator operates in TALR (L4)mode, “L4” is displayed on the refrigeratordisplay.- TALR (L4) mode is automatically deactivatedafter it lasts for the received duration (max. 15minutes), or when the Override key is pressed.The mode is immediately deactivated and therefrigerator returns to the normal state whenthe door is opened or closed, or the dispenseris used.Override ModeWhen you want the refrigerator to ignore theSMART GRID (Demand Response) signal fromthe Utility Company, you can activate OVERRIDEmode.When you activate OVERRIDE mode, therefrigerator ignores the SMART GRID (DemandResponse) signal and is not controlled by the UtilityCompany.Activating and deactivating Overridemode1. Press and hold the [Energy Saver] button for 3seconds.2. A buzzer sounds and `Or’ and `on’ is displayedon the freezer and fridge temperature displaysfor 5 seconds.3. If the refrigerator receives a SMART GRID(Demand Response) signal from the UtilityCompany, `Or’ is displayed in the freezertemperature display.4. To deactivate OVERRIDE mode, press and holdthe [Energy Saver] button for 3 seconds.5. A buzzer sounds and ‘Or’ and ‘oF’ is displayedon the freezer and fridge temperature displaysfor 5 seconds.Alternatively, you can activate ordeactivate OVERRIDE mode using theSamsung E-Smart App.DA68-02976A-01.indb 28 14. 3. 4. �� 1:24