S P E C I A L F E AT U R E SEnglish - 49TiltDue to the Earth’s magnetic field there may be some minor image tilt depending on theTV’s location. When this occurs, follow the steps below.1Press the MENU button.Press the ▲ or ▼ buttonto select “Picture”, thenpress the ENTER button.2Press the ▲ or ▼ buttonto select “Tilt”, then pressthe ENTER button.Press the œœ or √√ button toadjust the Tilt.Press the EXIT button to exitthe menu.Mode : Dynamic √Size : Normal √Tilt √T V PictureMode : Dynamic √Size : Normal √Tilt √T V PictureT V TiltLeft : 0 Right : 0TiltLNA (Low Noise Amplifier)When a weak broadcast signal causes an unclear, noisy picture, the “LNA” featureimproves the picture quality by setting to “On”. If you experience noise on a certainchannel, set the “LNA” to “On” or “Off” for this channel, to obtain the optimum picture.2Press the ▲ or ▼ buttonto select “LNA”, then pressthe ENTER button.Press the ▲ or ▼ button toselect ”On” or ”Off”, thenpress the ENTER buttonPress the EXIT button to exit.1Press the MENU button.Press the ▲ or ▼ buttonto select “Channel”, thenpress the ENTER button.Antenna : Air √Auto Program √Add / Delete √Favorite Channels √Name √Fine Tune √Signal Strength √LNA : On √T V ChannelAntenna : AirAuto ProgramAdd / DeleteFavorite ChannelsNameFine TuneSignal StrengthLNA : OffT V ChannelOffOnUse LEFT and RIGHT buttons on theremote control to adjust screen tilt.œ The LNA feature only workswhen tuned to an analogchannel.
