Samsung VC240 Quick Setup Manual

Also see for SyncMaster VC240: Reference guide Quick start guide User guide User manual Quick setup guide

&)'*(+BN68-02401C-01&)'*(+BN68-02401C-01Quick Setup GuideBefore attaching the stand, place a soft cloth on a flat ,table surface, and then place the product onto the cloth so that the screenis facing downwards.&)'*(+BN68-02401C-01Turn the stand in the directionindicated by the arrow.Caution: Do not remove the stopperpin before completely installingthe stand’s base. Otherwise it maycause physical injury.Turn the connecting screw at thebottom of the stand fully so that itis completely secured.After installation of the base iscomplete, stand the product up.Remove the stopper pin.•Adjust the height of the screen•to your specifications.Make sure that the stand hasbeen properly turned in the rightdirection.Push the base into the product’sstand in the direction indicated bythe arrow.Caution: 1. When placing the product on a flat surfacey you can damage the projection on the camera.2. To prevent damage, place the monitor down gently & carefully.3. Do not remove the stopper pin before installing the base.Package ContentsInstalling the standInstalling the standUnpack the product and check if all of the followingcontents have been included. Store the packaging boxin case you need to move the product at a later stage.Refer to Setup and Configuration Guide clip found on: www.radvision.com/VC240Setup&)'*(+BN68-02401C-01How to setup and configure your unit&)'*(+BN68-02401C-01

/ 2

Related manuals for Samsung SyncMaster VC240