3-24 Samsung ElectronicsAdjustment and AdjustmenttNote : "XX XX" indicate the previous preset value and adjusted value. Press the START/STOP (Confirm)button to store the adjusted value.Caution : For whole zoom range, it shall be in focus. The location of a focus lens is moving depending onthe location of zoom lens. During adjusting, micom measures the focus location from a near dis-tance to a long.1) Camera is set to E-E mode.2) Focus chart photo (the last page of manual)3) Ensure that camera is left an about 2.5 m distance from a focus chart and the focus of lens is placed verti-cally. Attach a focus chart to white or gray wall of a flat surface.4) Connect a video output terminal to a TV.5) Press the FF(Mode Up)/REW(Mode Down) button so that OSD shows "260 XX XX".6) Press the START/STOP (Confirm) button. Never impact on the lens when adjusting zoom and focus lens.There's is a flicker on screen after finishing the adjustment.3-2-2 Camera Adjustment16D XX(Adjusted value)(Stored value)XX1. LENS ZOOM TRACK2.5m +/-1Cm