Samsung VP-D73 Service Manual

Also see for SC-D73: Owner's instruction book Owner's instruction book Owner's instruction book

Contents

Samsung Electronics 3-333-6. CVF AdjustmentNotes : For CVF adjustment, use the buttons on the video camera and the remote control.After each adjustment step is completed, OSD shows "OK".EEPROM(ICV02) stores confirmed adjustment value of each adjustment step.After finishing the adjustment, turn power off.Note: In service adjustment mode, button names are different from those in customer function controlmode.STEP 11) Connect the power source(battery/DC cable).2) Set the "CAMERA/VCR" switch to "CAM-ERA" position and LCD is close.3) Camera screen and OSD appears.4) Open housing of the video camera andremove tape.STEP 21) Press and hold the "EDIT(+)" buttonon thevideo camera and "SELF TIMER" button onthe remote control at the same time formore than 5 seconds.2) Press the “DISPLAY” button to make colorbar appear.When monitor OSD shows as above screen, CVFadjustment mode has been activated successfully.Note : "XX" indicates variable values.1. How to get into the CVF adjust mode.2. Functions of each button on the Remote ControlMonitor screenRemote Control Button LocationCVFPLLEPR:XX EVR:XX01DescriptionButtonSTART/STOP (Confirm)FF (Mode Up)REW (Mode Down)PLAY (Data Up)STOP (Data Down)Stores changed value in the adjustment mode.Shift adjustment address to left.Shift adjustment address to right.Down value.Up value.Adjustment and Adjustment