Samsung WAM7500 User Manual

Also see for WAM6500: How to reset User manual User manual User manual User manual

Contents

❚ Adding a hUBAn product and a HUB may not pair successfully if the product and HUB are too far apart or areon different floors.In such cases, you can link two HUBs together by setting the second HUB to Repeater mode.The additional HUB amplifies the signal and lets you pair the product to the closest HUB.1 Set the HUB that is connected to the wireless routerto Pairing mode by pressing its SpK Add button for 1second.2 Plug in the new HUB you are using as an extender,and then press its SpK Add button for 10 seconds.3 The newly added HUB's LED indicators turn off andon, and it switches to Repeater mode.4 Once the connection between the two HUBs has beenestablished, the added HUB's ( ) indicator stopsblinking.noteS9 If your smart device is not connected to the wireless routerwith a Wi-Fi connection, the product will not appear on theSamsung Multiroom app.9 Place the HUB that is in Repeater mode in an appropriatelocation between the product and the HUB that is connected to the wireless router.9 You can set only one HUB to Repeater mode.relocating the productWhen relocating your product, refer to the below table.Wireless routerHUBIf you want to connect your product tothe current wireless router.If you want to connect your product to adifferent wireless router.Without a HUBTurn off the product, relocate it and thenturn it on.Turn off the product, relocate it, thenestablish the new connection as describedin the installation instructions on pages 8through 17. Click here.With a HUBConnect a LAN cable between the HUBand the new wireless router, turn on theHUB, and then turn on the product.ProductHUBUsed as aextender184444