Wireless network 118Using Auto Backup to send photos or videosYou can send photos or videos that you captured with the camera to a PC wirelessly.Sending photos or videos to a PC1 Rotate the mode dial to .2 Select .• If the the pop-up message that prompts you to download the applicationappears, select Next.• You must configure the backup PC information to use the Auto Backupfeature. For more details, refer to “Installing the program for Auto Backup onyour PC”. (p. 118) If the Auto Backup program is installed on your PC, save thePC information via USB cable or Wi-Fi connection.• The camera will automatically attempt to connect to a WLAN via the mostrecently connected AP device.• If the camera has not previously been connected to a WLAN, it will search foravailable AP devices. (p. 110)Installing the program for Auto Backup on your PC1 Install i-Launcher on the PC. (p. 103)2 Connect the camera to the PC with the USB cable.3 When the Auto Backup program icon appears, click it.• The Auto Backup program is installed on the PC and the informationabout the PC will be stored to the camera. Follow the on-screeninstructions to complete the installation.• You can also store the information about the PC to the camera byconnecting the PC and the camera via Wi-Fi.4 Remove the USB cable.Before installing the program, ensure that the PC is connected to a network.