Using AllShare Play to send filesWireless network 126Viewing photos or videos on devices that support AllShare Play1 Rotate the mode dial to .2 Select → Nearby Devices.• If the guide message appears, select OK.• The camera will automatically attempt to connect to a WLAN via the mostrecently connected AP device.• If the camera has not previously been connected to a WLAN, it will search foravailable AP devices. (p. 110)• You can set to allow only selected devices or all devices to connect bypressing [ ], and then selecting DLNA Access Control on the screen.• A sharing file list is created. Wait until other devices can find your camera.3 Connect the AllShare Play device to a network, and then turn onthe AllShare Play feature.• Refer to your device's user manual for more information.4 On the camera, allow the AllShare Play device to connect to yourcamera.5 On the AllShare Play device, select a camera to connect.6 On the AllShare Play device, browse the shared photos or videos.• For information about searching for the camera and browsing the photosor videos on the AllShare Play device, refer to the device's user manual.• Videos may not play smoothly depending on the type of AllShare Playdevice or the network condition. If this happens, re-record the videoin 640 X 480 or smaller quality and play it again. If videos do not playsmoothly on your device over the wireless connection, try connecting thecamera to the device with an A/V cable.AP▲ A camera is connected to a TV that supports AllShare Play via WLAN.