056 High resolution and picture quality increases file saving time,which increases stand-by time. If the [Continuous], [High-speed], [Motion Capture], [AEB] submenu is selected, the flash will be off automatically. If less than 3 pictures are available in the memory, the AEBshooting is not available. It is best to use a tripod for the AEB shooting as the time to saveeach image file is longer and blurring caused by camera shakemay occur.Setting AEB areaThe ranges and intervals of three photos can be set during AEB shooting.- Set a standard for the exposure bracketby pressing the LEFT/RIGHT buttons.- Set a range for the left and right exposurebracket by using the Smart Dial.Auto Focus typeYou can select your preferred Focus Area according to the shootingconditions.[Center AF] ( ) : The rectangular area in thecenter of the LCD monitorwill be focused[Multi AF] ( ) : This camera selects all ofavailable AF point from the 9AF points.[Selection AF] ( ) : Focus on the desired position of the LCD monitor.[Tracking AF] ( ) : The focus moves along with the movements of asubject.Ä When the camera focuses on the subject, the auto focus frameturns to green. When the camera doesn't focus on the subject, theauto focus frame turns to red.Ŷ How to Enable Selection AFAfter setting [Selection AF], press the OKbutton and then the screen for setting thelocation of a focus frame will appear.Press the Up/Down/Left/Right button tomove the focus mark to the desired position.Press the shutter button to enable SelectionAF. Once setting is complete, the focus markwill be fixed at the position set.Shooting ( )-2 -1 0 +1 +2AEB AreaBack MoveFocus AreaBack MoveFocus MarkMove Set