English - 1 Screen Mode: 1:/Wide Zoom/Zoom/4:When setting the picture size to Auto Wide in a 16:9 wide TV,you can determine the picture size you want to see the 4:3WSS (Wide Screen Service) image or nothing. Each individualEuropean country requires different picture size so this functionis intended for users to select it.− 1:: Sets the picture to 16:9 wide mode.− Wide Zoom: Magnify the size of the picture more than 4:3.− Zoom: Magnify the size of the picture vertically on screen.− 4:: Sets the picture to 4: normal mode.➢ This function is available in Auto Wide mode.➢ This function is not available in Component or HDMI mode. Digital NR: Off/Low/Medium/High/AutoIf the signal received by the television is weak, you can activate this feature to reduce any static andghosting that may appear on the screen.➢ When the signal is weak, select one of the other options until the best picture is displayed. Real 100 Hz Demo: Off/OnYou can get a clear distinction between “Real 100Hz” and 50Hz, especially when watching sports.Therefore, when seeing a paused or static image, you will not be able to distinguish between “Real100Hz” and 50Hz. DNIe: Off/Demo/OnThis TV includes the DNIe function so as to provide a high visual quality. If you set DNIe to on, youcan view the screen with the DNIe feature activated. If you set the DNIe to Demo, you can view theapplied DNIe and normal pictures on the screen, for demonstration purposes. Using this function, youcan view the difference in the visual quality.➢ DNIe TM (Digital Natural Image engine)This feature brings you more detailed image with 3D noise reduction, detail enhancement, contrastenhancement and white enhancement. New image compensation Algorithm gives brighter, clearer,more detailed image to you. DNIe TM technology will fit every signal into your eyes.➢ This cofunction is not available in PC mode.➢ DNIe is only available in Dynamic mode. HDMI Black Level: Normal/LowUsing this function, you can adjust the image quality when the screen burn (appearance of blacklevel, low contrast, low color, etc.) is encountered by the HDMI input for RGB limited range (16 to235).➢ This function is active only when the externel input connects to HDMI(RGB signals). Blue Only Mode: Off/OnThis function is for AV device measurement experts. This function displays the blue signal only byremoving the red and green signals from the video signal so as to provide a Blue Filter effect that isused to adjust the Colour and Tint of video equipment such as DVD players, Home Theaters, etc.Using this function, you can adjust the Colour and Tint topreferred values appropriate to the signal level of each videodevice using the Red/Green/Blue/Cyan/Magenta/Yellow ColourBar Patterns, without using an additional Blue Filter.➢ Blue Only Mode is available when the picture mode is setto Movie or Standard. Screen Burn ProtectionTo reduce the possibility of screen burn, this unit is equippedwith screen burn prevention technology. This technologyenables you to set picture movement up/down (Vertical Line)and side to side (Horizontal Dot). The Time setting allowsyou to program the time between movement of the picture inminutes.− Pixel Shift: Using this function, you can minutely movepixels on the PDP in horizontal or vertical direction tominimize after image on the screen.• Set Pixel Shift to On by pressing the ▲ or ▼ button, thenpress the ENTER button.• Select the required option by pressing the ▲ or ▼ button,then press the ENTER button.Available options: Horizontal Dot, Vertical Line, TimeContinued...Move Enter ReturnColour Tone : Normal Size : Auto Wide Screen Mode : 1: Digital NR : Auto Real 100 Hz Demo : Off DNle : On HDMI Black Level : Normal Blue only mode : Off Screen Burn Protection Picture OptionsT VMove Enter ReturnPixel Shift White Scrolling Side Gray : Dark Screen Burn ProtectionT VMove Enter ReturnColour Tone : NormalSize : Auto WideScreen Mode : 1:Digital NR :Real 100 Hz Demo : OffDNle :HDMI Black Level :Blue only mode : OffScreen Burn ProtectionPicture OptionsT V1:Wide ZoomZoom4:
