Samsung XE700T1C User Manual

Also see for ATIV Smart PC Pro XE500T1C: User guide Guías del usuario

74Chapter 3.Using the computer4 Select Save to save the changes.5 If the system automatically restarts and the Samsung logoscreen appears, press the Home button검색공유시작장치설정several times.6 Select Security > TPM Configuration and set the TPMDevice item to Enabled.Set the TPM State to Enable & Activate.TPM DeviceTPM StateSecurity Chip StateAptio Setup Utility - Copy (C) 2012 American Megatrends, Inc.EnabledEnabled & ActivateClearEnabled & ActivateDeactivate & DisableClear7 Select Save to save the changes.8 The computer automatically restarts. Initialization of the TPMchip has been completed. Now, install the TPM program andregister the TPM program.Installing the TPM programYou can install the TPM program as follows. Install the programaccording to the procedures below.This program is only provided for models with Recovery andthe TPM function.1 When the computer is off, press the Power button whileholding down the Volume (+) button.Select Recovery to enter software recovery mode.2 Select System Software. If the message box appears, clickYes.The computer boots up in Windows.3 If you move to the Desktop screen, the SW Update programruns.Select TPM Host SW and click Install Now.If the system software media is supplied with the product,you can install the program by using the system softwaremedia (only when supplied.)4 After the installation, if you click OK, the computer restarts.Using the TPM Security Device (Optional)