Samsung iDCS 28D User Manual

Also see for IDCS 14B STRIP: User guide User guide User instructions User guide

• Dial the alarm number 1, 2 or 3.• Dial the time you want the alarm to go off. Enter the time as HHMM(hours and minutes) using the 24 hour clock.• Dial 0 (NOT SET), 1 (TODAY) or 2 (DAILY) to select the alarm type.• Write your message using the dial pad keys. Each press of a key selectsa character. Pressing the next key moves the cursor to the next position.For example, if your message is “TAKE MEDICATION,” press 8 once toget the letter “T.” Press 2 once to get “A.” Press 5 twice to get “K.” Con-tinue selecting characters from the following table to complete yourmessage.• Press the TRANSFER key to store the alarm and reminder message.• Repeat for each alarm if needed.COUNT 1 2 3 4 5DIAL 0 < > . ) 0DIAL 1 space ? , ! 1DIAL 2 A B C @ 2DIAL 3 D E F # 3DIAL 4 G H I $ 4DIAL 5 J K L % 5DIAL 6 M N O ^ 6DIAL 7 P Q R S 7DIAL 8 T U V 4 8DIAL 9 W X Y Z 9DIAL 4 : = [ ] 4NOTES:1. When the character you want appears on the same dial pad key as theprevious character, press UP to move the cursor one space to the right.2. Other symbols are available for DIAL #.To cancel an individual alarm and reminder message:• Press TRANSFER and then dial 112.• Dial alarm number 1, 2 or 3.• Press the HOLD key.• Press the TRANSFER key.51CALL DURATION TIMERThe system can be set to automatically time outside calls. A few secondsafter you dial a telephone number, the timer appears in the display. Itappears immediately for incoming calls. The call timer continues for the du-ration of the call. Call duration times are displayed in minutes and seconds.If a call lasts longer than 60 minutes, the timer restarts.You can press the TIMER key to manually begin timing a call. Press it againto stop timing. If you press it while the automatic timer is on, the call dura-tion time is restarted.AUTO TIMERDisplay keyset users may have the timer automatically start when theyanswer incoming calls or after a short delay on an outgoing call.• With the handset on-hook, press TRANSFER and then dial 110.• Dial 011 to turn the auto timer on or 010 to turn it off.• Press TRANSFER to store your selection.TIMER FUNCTIONDisplay keyset users may use this feature as a simple stopwatch.• When the keyset is idle, press the TIMER button to start timing.• Press the TIMER button again to stop timing.• Read the elapsed time in the display.• Lift the handset and replace it. The display will return to date and time.VIEWING MESSAGE INDICATIONSYou can view all of your message indications before you return them:• With the handset on-hook, press the MESSAGE key with the red flash-ing light.• The first station that left a message indication will be displayed.• Press the UP and DOWN arrows to scroll through the stations that leftmessage indications. Use the soft keys to reply, clear or advance to thenext message.• Press the ANS/RLS key to return your keyset to the idle condition.ALARM REMINDER MESSAGESWhen you use the alarm/appointment reminder feature, you create a 16character reminder message. When the alarm rings, your message will ap-pear instead of [ALARM REMINDER]. To program reminder messages:• Press TRANSFER and then dial 116.50