Samsung iDCS500 User Manual

Also see for iDCS500: Programming manual General description User guide User guide Manual

Contents

Samsung iDCS500 iDCS Keyset User Guide– 14 –2. To finish the call, replace the handset or press the ANS/RLS key.Note: To set Voice Announce mode, see the section “Customising Your Keyset”.AUTO ANSWER MODEWhen another extension calls you, your keyset will sound a brief attentiontone and then automatically answer the call.1. Your microphone and speaker are turned on and you can speak hands-free. For privacy, use the handset.2. To finish the call, replace the handset or press the ANS/RLS key.Note:• To set Auto Answer mode, see the section “Customising Your Keyset.”.• If you have set a Forward No Answer condition at your keyset, you must an-swer ‘screened’ transfer calls by pressing the ANS/RLS key (before the sys-tem timer fo rwards the call).BUSY EXTENSION CALLBACKWhen you call another extension and receive a busy signal, you can requestthe system to call you back when the extension becomes free.1. Press the CBK key or CBK soft key or dial 44. (Your CBK key will light.)When the busy extension becomes free, your keyset will ring. You mustanswer the callback within 30 seconds or it will be cancelled.2. Lift the handset or press the ANS/RLS key to call the now idle extensionand wait for the party to answer.Note:• If the Hot Keypad feature has been turned off, you must first lift the handset orpress the Speaker key before dialling.CANCELLING A CALLBACKYour keyset can have a maximum of five Callbacks set on extensions at anyone time. To cancel a Callback:1. Press the CBK key or dial 44.2. Press the HOLD key or CLEAR soft key.