Samsung iDCS500 User Manual

Also see for iDCS500: Programming manual General description User guide User guide Manual

Contents

Samsung iDCS500 iDCS Keyset User Guide– 52 –HEADSET OPERATIONWhen using a headset, you press the ANS/RLS key to answer and releasecalls. You can switch between handset mode and headset mode easily.1. While on-hook, dial Transfer 110.2. Dial 021 to use the headset or 020 to use the handset. (Or use the softkeys and Volume keys to select the option in the display.)3. Press the Transfer key to store your selection.If you have a programmed HDSET key, press this to select Headset mode. Thekey LED will remain on while you are in this mode. Press the key again to return tohandset mode (the LED turns off).HOT KEYPADYour keyset’s keypad can be made “live” or “hot” so that it is not necessaryto lift the handset or press the Speaker key before you begin dialling. Callscan be made and features activated by simply dialling the line number, trunkgroup access code, internal number or feature access code. To activate thisfeature:1. While on-hook, dial Transfer 110.2. Dial 031 to turn the Hot Keypad on or 030 to turn it off. (Or use the softkeys and Volume keys to select the option in the display.)3. Press the Transfer key to store your selection.KEY CONFIRMATION TONEYou normally hear a short beep (confirmation tone) each time you press akey on the dial keypad. This tone can be turned on or off.1. While on-hook, dial Transfer 110.2. Dial 041 to turn tones on or 040 to turn tones off. (Or use the soft keysand Volume keys to select the option in the display.)3. Press the Transfer key to store your selection.