Samsung iDCS500 User Manual

Also see for iDCS500: Programming manual General description User guide User guide Manual

Samsung iDCS500 SLT User Guide–21–ACCOUNT CODESWhen it is equipped with optional equipment, your system allows calls to becharged to different accounts. You can enter an account code either during a call orwhen the external party hangs up.To enter an account code during a call:1. Press Recall, listen for confirmation tone and dial 47. Your call is inter-rupted temporarily.2. Dial the account code (a maximum of 12 characters, which can include Vand #).3. Press Recall or V to return to the conversation.If you make an error, repeat the procedure with the correct code. Only the last ac-count code dialled will be recorded.To enter an account code after the external party hangs up:1. Press Recall, listen for confirmation tone and dial 47.2. Dial the account code (a maximum of 12 characters, which can include Vand #).Note: If you wait for the external party to hang up, you must complete this procedurewithin 10 seconds. You cannot repeat the procedure if you make a mistake.n FORCED ACCOUNT CODESTh e system administrator can program individual extensions to prevent externalcalls being made until an account code is entered. If this is the case with your ex-tension, then to make an external call:1. Lift the handset, wait for dial tone, and dial 47.2. Dial the account code (a maximum of 12 characters, V and # are not al-lowed).3. Press the V key.You hear confirmation tone followed by dial tone. An external call can now be made.Note: Only one call can be made for each code entry—the above procedure must beused for each call.