Samsung iDCS500 User Manual

Also see for iDCS500: Programming manual General description User guide User guide Manual

Samsung iDCS500 SLT User Guide–2–THINGS YOU SHOULD KNOWLifting the handset on your phone provides system dial tone. To get an outside linefrom the telephone company, dial an ac cess code (usually the digit 9 in the UK).Check with your system administrator if you are not sure of this code. To call an-other station in your system, simply dial its extension number. See also SystemAccess Codes, below.RECALL, FLASH & HOOKFLASHTh roughout this guide, you will see references to the Recall key. This key is re-quired for feature operation. Some telephones use FLASH instead of RECALL. Thesame effect can be achieved by a “hookflash.” This is a momentary operation of thehookswitch.C.O. LINESLines from the Telephone Company are called “Central Office” (C.O.) lines. Calls onthese lines are referred to as outside or external calls. These C.O. lines are ac-cessed by dialling an access code. For example, in the UK, dial 9 to get a localoutside line. To get a specific line, dial the 3- or 4-digit line number. Each line in thesystem is numbered beginning with 701 (or 7001), then 702 (7002), 703 (7003) andso on. If Least Cost Routing (LCR) is programmed into the system, you need onlydial 9.Your system administrator can tell you what lines are available and how to accessthem.DISTINCTIVE RINGINGiDCS500 provides distinctive ring patterns to your phone:l External calls have a double ring tone repeatedl Internal calls have a single ring tone repeatedl Doorphone calls and alarm/appointment reminders have a short triple ringtone rapidly repeated.