44 45WARNING: Your healthcare professional should recommendwhat your hyperglycemic limit is.[1] When your meter is deactivated, press the CHECK ( )button once to enter menu mode. The word “MEM” isdisplayed.[2] Press the DOWN ( ) or UP ( ) arrow buttonsuntil the abbreviation “HYPER” is displayed.[3] Press the CHECK ( ) button to enter and editthe Hyperglycemic Warning Alarm settings.what your hypoglycemic limit is.[1] When your meter is deactivated, press the CHECK ( )button once to enter menu mode. The word “MEM” isdisplayed.[2] Press the DOWN ( ) or UP ( ) arrow buttonsuntil the abbreviation “HYPO” is displayed.[3] Press the CHECK ( ) button to enter and editthe Hypoglycemic Warning Alarm settings.[4] Set the Hypoglycemic Alarm ON or OFF withthe DOWN ( ) or UP ( ) arrow buttons. Yourselection will be highlighted by the blinkingof the symbol. Press the CHECK ( ) buttonto confirm your selection and move on to thehypoglycemic threshold setting.The Hyperglycemic Warning Alarm alerts you when yourglucose test results are above the hyperglycemic thresholdyou have set. The meter is pre-set to a hyperglycemicthreshold of 13.3 mmol/L. Always consult your healthcareprofessional for your recommended target ranges. Whenyour glucose test results are above your set hyperglycemicthreshold, the meter display will flash your test results, theabbreviation “HYPr,” time, and date repeatedly.SettingHypoglycemic Warning Alarms15CHAPTERSettingHyperglycaemic Warning Alarms16CHAPTERThe hypoglycemic Warning Alarm alerts you when yourglucose test results are below the hypoglycemic thresholdyou have set. The meter is pre-set to a hypoglycemicthreshold of 3.9 mmol/L. Always consult your healthcareprofessional for your recommended target ranges. Whenyour glucose test results are below your set hypoglycemicthreshold, the meter display will flash your test results, theabbreviation “HYPO,” time, and date repeatedly.WARNING:Your healthcare professional should recommend[5] Set the hypoglycemic threshold(flashing) with the DOWN ( ) or UP ( )arrow buttons. Press the CHECK ( ) buttonto confirm your selection and return to themenu.