Sanyo DP26671 Owner's Manual

Also see for DP26671: Service manual Service manual

25 ENGLISH3 On the screen, “ ” changes to “Loading” and thenplayback will commence.A menu screen may appear on the TV screen,if the disc has a menu feature. In this case,press ▲, ▼, ◀, ▶ or ENTER to operate a menufeature.•4 Press STOP ( ) to end playback.The unit can record where you stop a video, but itdepends on a disc you are using. Press PLAY( ) to resume a playback point. The unit canstore a memory of stopped point of last five discsthat you have played. When one of these discsis next loaded, you can resume playback fromwhere you stopped playing last time.If you press STOP ( ) again (“Resume off”appears on the screen) the unit will clear thestopped point.You cannot save a stopped point for some discs.If a number of discs played and stored in the unitexceeds five, a new memory will overwrite the oldstored memory.•••5 Press (EJECT).Remove the disc and then press POWER.The unit turns off.When you eject the disc, you may hearmechanism noise, but it is not malfunction.•NOTE:If a non-compatible disc is loaded, “Can’t play disc”or “Incompatible disc region number Can’t playdisc” will appear on the TV screen according to thetype of loaded disc. In this case, check your discagain (see page 11).Some discs may take a minute or so to startplayback.A prohibition message “Depending on the disc, thisoperation may be prohibited” or “This operationcan’t be performed” may appear at the screen. Thismessage means either the feature you tried is notavailable on the disc, or the unit cannot accessthe feature at this time. This does not indicate aproblem with the unit.When you set a single-faced disc label downwards(i.e. the wrong way up) “Loading” will appear on thedisplay and then “Can’t play disc” will be displayed.Some playback operations of DVDs may beintentionally fixed by software producers. Sincethis unit plays DVDs according to the disc contentrecorded, some playback features may not beavailable. Also refer to the instructions supplied withthe DVDs.•••••PreparationThe following pages describe the setup/operation in DVD mode.PreparationBefore DVD/CD operation, please make the followingpreparations.1 Insert the AC cord plug into a standard 120V60Hz polarized AC outlet.If the AC cord plug is plugged in for the firsttime, wait for about 5 seconds before pressingPOWER.NOTE:When connecting to other equipment, unplugthe unit from the AC outlet.••2 Press POWER on the unit or on the remotecontrol to turn on the unit. The POWER indicatorwill change to green.Each time you turn the unit ON, the TV/DVDstarts from the TV mode.When using an amplifier, switch on the amplifier.••3 Press TV/DVD to select DVD mode.The DVD startup screen will appear on the screen.NOTE:If the unit does not operate properly:Static electricity, etc., may affect the player’soperation. Disconnect the AC power cord once,then connect it again.About inserting disc:If the unit is slanted or moved while inserting disc,the disc may get damage.Status display of discPress DISPLAY. The status display of the disc willappear on the screenDisplay messages may change at every time whenyou press DISPLAY for some discs or files.To make the status display screen disappear, pressDISPLAY again.Playback procedure1 Press TV/DVD to select DVD mode.2 Place the disc in thedisc slot with the labelside facing forward. (Ifthe disc has a label.)Hold the disc withouttouching either of itssurfaces, align it withthe guides, and place itin position.•••56Q0221A_eng.indd 2556Q0221A_eng.indd 25 1/11/11 3:24:29 PM1/11/11 3:24:29 PM