6IMPORTANT SAFETY INSTRUCTIONS (continued)23) When you connect the product to other equipment, turn off the power and unplug all of the equipment fromthe wall outlet. Failure to do so may cause an electric shock and serious personal injury. Read the owner'smanual of the other equipment carefully and follow the instructions when making any connections.24) Reduce the volume to the minimum level before you turn on the product. Otherwise, sudden high volumesound may cause hearing or speaker damage.25) Do not allow the product to output distorted sound for an extended period of time. It may cause speakeroverheating and fire.26) When you use the headphones, keep the volume at a moderate level. If you use the headphonescontinuously with high volume sound, it may cause hearing damage.27) Do not look into the opening of the disc slot or ventilation opening of the product to see the source of thelaser beam. It may cause eye damage.28) Do not use a cracked, deformed, or repaired disc. These discs are easily broken and may cause seriouspersonal injury and product malfunction.29) This reminder is provided to call the cable TV system installer’s attention to Article 820-40 of the NECthat provides guidelines for proper grounding and, in particular, specifies that the cable ground shall beconnected to the grounding system of the building, as close to the point of cable entry as practical.30) The socket-outlet must be installed near the unit and easily accessible.CONDENSATIONMoisture will form in the operating section of the player if the player is brought from cool surroundings into a warmroom or if the temperature of the room rises suddenly. When this happens, player's performance will be impaired.To prevent this, let the player stand in its new surroundings for about an hour before switching it on, or make surethat the room temperature rises gradually.Condensation may also form during the summer if the player is exposed to the breeze from an air conditioner. Insuch cases, change the location of the player.HOW TO HANDLE THE LCD PANELDo not press hard or jolt the LCD panel. It may cause the LCD panel glass to break and injury may occur.If the LCD panel is broken, make absolutely sure that you do not touch the liquid in the panel. This may causeskin inflammation.If the liquid gets in your mouth, immediately gargle and consult with your doctor. Also, if the liquid gets in youreyes or touches your skin, consult with your doctor after rinsing for at least 15 minutes or longer in clean water.••CHILD SAFETY:It Makes A Difference How and Where You Use Your Flat Panel DisplayCongratulations on your purchase! As you enjoy your new product, please keep these safety tips in mind:THE ISSUEThe home theater entertainment experience is a growing trend and larger flat panel displays are popularpurchases. However, flat panel displays are not always supported on the proper stands or installedaccording to the manufacturer’s recommendations.Flat panel displays that are inappropriately situated on dressers, bookcases, shelves, desks, speakers,chests or carts may fall over and cause injury.THIS MANUFACTURER CARES!The consumer electronics industry is committed to making home entertainment enjoyable and safe.TUNE INTO SAFETYOne size does NOT fit all. Follow the manufacturer’s recommendations for the safe installation and use ofyour flat panel display.Carefully read and understand all enclosed instructions for proper use of this product.Don’t allow children to climb on or play with furniture and television sets.Don’t place flat panel displays on furniture that can easily be used as steps, such as a chest of drawers.Remember that children can become excited while watching a program, especially on a “larger than life” flatpanel display. Care should be taken to place or install the display where it cannot be pushed, pulled over, orknocked down.Care should be taken to route all cords and cables connected to the flat panel display so that they cannot bepulled or grabbed by curious children.WALL MOUNTING: IF YOU DECIDE TO WALL MOUNT YOUR FLAT PANEL DISPLAY, ALWAYS:Use a mount that has been recommended by the display manufacturer and/or listed by an independentlaboratory (such as UL, CSA, ETL).Follow all instructions supplied by the display and wall mount manufacturers.If you have any doubts about your ability to safely install your flat panel display, contact your retailer aboutprofessional installation.Make sure that the wall where you are mounting the display is appropriate to support the weight of the unit/product and wall mount. If you are unsure, contact a professional installer.A minimum of two people are required for installation. Flat panel displays can be heavy.56Q0221A_eng.indd 656Q0221A_eng.indd 6 1/8/11 5:31:39 PM1/8/11 5:31:39 PM