SAVING (COPYING) RECORDED IMAGESFormatting CompactFlash cardsYou can format CompactFlash cards and microdrives by selecting“FORMAT COMPACTFLASH”.You can only use a CompactFlash card that has been formatted toFAT16 specifications. FAT32 formatted cards cannot be recognized.CompactFlash recording area1 A SANYO folder is created in the root directory.2 Sub-folders for holding the copied images are created insequence in the SANYO folder.3 Sub-folders are created within the date/time folder with namesstarting from IMG00001. Each sub-folder can hold 200 images.4 To view the file listing using a computer, use a browser suchas Internet Explorer 5.0 or later to open the INDEX.HTM files.The JPEG files can be played back as a slideshow.Note:• JPG images are recorded as field images, so that when they areviewed using the normal image viewer, they are compressed by1/2 in the vertical direction. Make sure that you view them using theINDEX.HTM file.• When frame recording images are copied to a CompactFlash card,the images are copied separately as two field images, so thatframe playback is not possible when viewing these images using acomputer.• Images that have been copied onto a CompactFlash card containcodes for detecting file tampering, and these codes can berecognized by computer software applications that can detect filetampering. Contact the place of purchase for details.COPY TO : ARCHIVE AREAHOW MANY : 20 PICTURESSTART ->FORMAT COMPACT FLASH ->CHANGE WITH JOG. SET WITH SHUTTLECOMPACT FLASHSANYO 02032101 IMG000011 2 3IMG000023IMG000033INDEX.HTM400000001.JPG00000002.JPG00000003.JPGIMPORTANT INFORMATIONCopying camera images to the archive recordingarea or to a CompactFlash cardWhen the Digital Video Recorder is connected to a multiplexer(including multiplexers from other manufacturers such as Robot,DM and Sony), you can copy images from a specified camerathat have been recorded by the Digital Video Recorder to thearchive area or to a CompactFlash card.1) Multiplexer operationPress the VCR button and display the split screen.2) Digital Video Recorder operationSpecify the camera channel to be copied by means of theprocedure in “Selecting a camera image channel forplayback” on page 23.3) Multiplexer operationPress the camera select button for the selected camera todisplay the images for that camera in a single screen.4) Digital Video Recorder operation• If copying images to the archive recording areaCarry out the procedure in “Copying images to thehard disk area” on page 34.• If copying images from the archive recording area to aCompactFlash cardCarry out the procedure in “Copying images from thearchive area to a CompactFlash card” on page 35.“COPYING” will be displayed on each screen, andcopying will then start. When copying is complete,“COPY FINISHED” will be displayed.Note:If you copy images to the archive recording area of a DigitalVideo Recorder or to a CompactFlash card without specifyingthe camera channel with the Digital Video Recorder in step 2above, all camera images from the multiplexer will be copied.The copying function in this special screen can only be carriedout by multiplexers for which the Digital Video Recorder candirectly decode the multiplexer’s ID information. The multiplexerinterchangeability list is given below.A. Multiplexers that can be directly decodedSanyo, Robot, DM, SonyB. Multiplexers that only allow decoding by the multiplexerPelco, Kalatel, ATV, Ultrak36 English
