NETWORK SET SETTING8 Turn the shuttle dial clockwise and use the jog dial andshuttle dial to display the GATEWAY (example:“ 192.168.0.1” ), and then turn the shuttle dial clockwise.With the final shuttle dial operation, the cursor moves to thePORT setting of “80”.Note: When connecting this unit to a network, check the IPADDRESS, SUBNET MASK and GATEWAY settings with theLAN Network Administrator.9 Turn the shuttle dial clockwise, use the jog dial to enter thePORT number (example: “ 90"), and then turn the shuttle dialclockwise.You can set any port number you wish within the range of 1 to65535.Note: If the port number is set to something other than the defaultsetting of “80”, type in the port number after the “:” in the IPaddress.PASSWORD SET settingFor network connection there are three access levels, each of whichhas a password. Each password can consist of a combination of 4 to 8alphanumeric symbols.Note: The cursor cannot be moved to ID or PASSWORD (4-8).Example: Set AB123456 as the ID1 password.1 Use the jog dial to move the cursor to ID1, and then turn theshuttle dial clockwise.The initial digit 1 of the password entry flashes.• The characters that can be used in the password are: 0, 1 ... 9,A, B ... ZNote:• ID1: This level can only observe a live image through the network.• ID2: This level can observe a live image and play back and searchrecorded images through the network.• ID3: This level allows all digital video recorder operations andsettings to be carried out.2 Use the jog dial to display “ A” , and then turn the shuttle dial.The second digit 1 flashes.3 Use the jog dial to display “ B” , and then turn the shuttle dial.The third digit 1 flashes.4 Repeat this procedure to continue entering “ 123456” , andthen turn the shuttle dial clockwise.The cursor moves to ID2.5 As required, use the same procedure to set passwords forID2 and ID3, and then turn the shuttle dial clockwise.The cursor moves to LAN CARD.6 Press the EXIT/OSD button.The display returns to the normal screen.7 Computer operationRefer to the separate Manual for Remote Operation by NetworkConnection.PORT : 00080ID : PASSWORD (4-8)ID1 : 1111----ID2 : 2222----ID3 : 3333----ID1 : A111----ID1 : AB11----PORT : 00080ID : PASSWORD (4-8)ID1 : AB123456ID2 : 2222----ID3 : 3333----EXIT/OSD68 English
