Sanyo DSR-3009 Manual

Also see for DSR-3009: Instruction manual

Sanyo DSR-3009 Manual Manual pdf 15 page image

14 EnglishMenu Setting ProceduresThis lets you set the conditions for timer recording, such as the timer operating time, separately for eachday of the week.1 Select the timer recording conditions for each weekday from the menu.2 Click [SAVE] to complete the timer settings (or changes).1 WEEKSpecifies the weekdays for making timer recordings. Severaltimer recordings can also be made at different times on thesame weekday by changing the setting row.2 STARTEnter the time for timer recording to start.3 STOPEnter the time for timer recording to stop.4 PROGRAMSpecify the program to use for recording images. (See p. 9)5 FPSSet the recording rate (See p. 13)6 SETSet this to “ON” if timer recording is to be carried out.Set this to “OFF” if timer recording is not to be carried out.7 DLYEnter the start and stop times, image recording program andthe recording rate and change SET to “ON” to enable timerrecording at the same time each day.The DLY setting conditions take precedence over the settingconditions that have been made separately for each day.7. TIMER SET1 2 3 4 5 67The [TIMER SET] menu is for setting the conditions for timer recording. To actually carry out timer recording based onthese setting conditions, you will need to click the [TIMER] button on the operating panel. (See p. 6 and 22.)When the digital video recorder switches to timer recording standby mode and the setting time is reached, timerrecording will start automatically.The timer recording operation is indicated by a “TIMER STANDBY” or “TIMER RECORDING” message appearing on thescreen.Points to note and applications of timer settings• If timer reservations overlap, the earlier time setting will take precedence for recording.• If you wish to set the timer to continue for more than 24 hours, use the bottom two lines on the setting screen to make this setting.1. Switch the setting format by clicking the [OVER 24H] button.2. Use the top line to set the start day and time.3. Use the bottom line to specify the stop day and the time and recording cycle.4. When [SET] in the bottom line is set to [ON], timer recording for more than 24 hours will be set.